BLUESKY Nail Lamp Led/UV - 48W

SKU: F110240

$39.99

Our Bluesky LED/UV nail lamp is lightweight, compact, and easy to use for the perfect at-home gel manicure. Cure your gel polish using our LED/UV gel nail lamp, which comes with a 30 second and 60-second timer. 

Uses a combination of UV and LED wavelengths at 365nm and 405nm to ensure all Gel consistencies can be cured.

Includes:

- 48W LED/UV Nail Lamp for curing gel polish at home.
- Plug and lead - with AU wall plug.
- Instructions for use.

Specification & Feature

Specification:

  • Product Size: 10ml (.33fl oz)
  • Product Type: Gel Polish

Features:

  • Fashionable Colors in Lovely Gift Packaging
  • Easy to Apply without nicks, chips, or smudges
  • Durable - lasts for more than 20 days
  • Silky Texture without floating
  • No Shrinking or Bleeding into Cuticles
  • Odorless, Cruelty-free & Eco-friendly
  • Fully certified and tested
  • Highly Pigmented - Full Coverage with one layer
  • Suitable for nail art: painting, lining, shading
  • Easy to Remove and Store

Package Includes: 1 Gel Nail Polish of 10ml

Note:

- Due to different monitor settings and electronic devices colors may differ slightly.

- May cause an allergic reaction.

- Please take a skin test every time before doing a manicure.

- Please stop using immediately once feeling uncomfortable.

Reminder:

Cure under UV/LED lamp for 60 secs. Base and Topcoat required. If gel feels thick or tacky, place in hot water for 1-2 minutes, remove from water and shake well.

How to Apply Gel Polish

Step 1: Prep the nail.
Trim, file and buff nails for a clean and dry surface. Push back the cuticle. Remove shine from the natural nail with a file or a drill, especially around the cuticle and edges of the nail. Use brush remove dust and clean. (*Before opening the bottle, roll the bottle between your hands back and forth to gently mix.)

Step 2: Apply the base coat.
Apply thin base coat, cure under UV/LED lamp for 60-90 seconds.

Step 3: Apply the color gel.
Apply 1st thin layer of color gel polish - cure. (60 seconds)
Apply 2nd layer of color gel polish - cure. (60 seconds)
Apply 3rd layer of color gel polish if needed. - cure. (60 seconds)
*When applying color, wipe excess gel with brush before applying strokes.

Step 4: Apply the top coat.
Finish off with a layer of top coat, cure under UV/LED lamp for 90-120 seconds.

- Do not apply overmuch base coat or top coat and, the thinner, the better, otherwise it will get the gel shrunk and peeled off. Applying every thin coat is the key. -

Chip or peel off easily?
1. Remove the cuticle, trim the edge, polish your nails, ensure your nails are completely dry, clean and oil-free.
2. Avoid to apply the gel to skin or cuticle
3. Remember to cap the nail edge. (Apply gel to the edge of each nail to seal the gel with the brush horizontally to avoid chipping.)

Not dry?
Check your cure lamp and pay attention to the curing time. UV lamp for 120s, LED lamp for 60s.

How to remove?
1. Lightly buff off the shine from the top of nails using a nail buffer.
2.Soak a cotton ball or pad with nail gel remover and place on top of each nail.
3. Wrap the nail with aluminum foil or any nail wrap to secure and allow the remover to soak.
4. Soak for a minimum of 15 minutes.
5. Remove cotton and foils one at a time and gently push off gel using a removal wand. Gel should come off easily without much effort. If necessary, re-saturate cotton and rewrap finger and soak for 5 more minutes.
6. Lightly buff nails again once all gel is removed.

Our Bluesky LED/UV nail lamp is lightweight, compact, and easy to use for the perfect at-home gel manicure. Cure your gel polish using our LED/UV gel nail lamp, which comes with a 30 second and 60-second timer. 

Uses a combination of UV and LED wavelengths at 365nm and 405nm to ensure all Gel consistencies can be cured.

Includes:

- 48W LED/UV Nail Lamp for curing gel polish at home.
- Plug and lead - with AU wall plug.
- Instructions for use.